MEKAHSA MACHINERY SDN BHD
4 Plastic Crusher Facts Kepong Buyers Often Miss
Motor power alone does not determine whether a crusher will suit your production. Material shape, screen behaviour, blade condition and the surrounding workflow can all change output quality, throughput and operating effort.

A crusher screen with 10 mm holes does not necessarily produce pieces measuring 10 mm in every direction. For a Kepong buyer, the right machine depends on the actual scrap, required regrind and complete material-handling setup—not the motor rating alone. These four lesser-known facts will help you compare quotations with fewer surprises.
1 The screen opening is not the finished flake size
A crusher repeatedly cuts material between rotating and stationary knives until pieces can pass through the screen. A 10 mm aperture therefore controls passage, but it does not create perfectly uniform 10 mm cubes. Thin, elongated shards may pass through diagonally, while brittle plastic can generate smaller fines.
This matters when regrind will return to an extruder or injection moulding process. Excessive fines melt and feed differently from consistent granules, while long pieces can bridge inside a hopper or feed throat. Ask for an output sample made from your actual scrap and inspect the spread of particle sizes, not just the nominal screen dimension. The part most people skip is checking how much dust and stringy material appears in the sample.
2 Two equal weights can require very different crushers
Twenty kilograms of compact injection runners behaves nothing like 20 kilograms of hollow bottles. Bottles occupy more hopper volume and may bounce or bridge above the rotor; thick runners need a cutting chamber and knife arrangement capable of taking a harder initial bite. Film and woven sacks present another problem because flexible material can wrap around a rotor instead of fracturing cleanly.
That is why a useful enquiry includes the largest piece dimensions, wall thickness, resin type, bulk density and required kilograms per hour. Hopper throat size and cutting-chamber width may limit practical feeding before motor power becomes the issue. Mekahsa Machinery sells and services crushers, so buyers can frame the discussion around both the feed material and the maintenance access needed after installation.
3 Sharp blades can matter more than extra motor power
Correct knife clearance creates a shearing action. Dull edges or excessive clearance make the machine tear and rub the plastic, which can produce heat, stringy regrind, extra fines and higher electrical load. A warm discharge or steadily rising motor current can be an early sign that the cutting condition needs attention rather than proof that the motor is undersized.
Before buying, check whether the knives are adjustable and replaceable, how safely the screen can be removed, and whether technicians can reach the rotor and bed knives without dismantling half the machine. Also ask about overload protection, hopper safety interlocks and the procedure for clearing a jam. These details affect maintenance time every time a screen is changed or a blade is resharpened.
4 The equipment around the crusher changes the real cost
A crusher rarely works alone. The operating setup may need a conveyor or manual feed station, a collection bin, dust control, a blower-and-cyclone arrangement or metal separation before material reaches the cutting chamber. Poor collection can spill regrind, while uncontrolled dust can coat motor cooling inlets and electrical cabinets—especially in a warm Malaysian production area.
Check the available three-phase electrical supply, floor space, discharge height, ventilation clearance and route for bringing the machine into position. Noise and vibration also matter if the crusher will sit beside operators or near an office wall. Mekahsa Machinery provides delivery, installation and equipment set-up services, so include site access, utilities and the intended line arrangement when requesting a proposal.
Frequently asked questions
What should I send when asking for a plastic crusher quotation in Kepong?
Send your area or postcode, plastic type, largest piece dimensions, wall thickness, expected kilograms per hour and desired regrind size. A photograph with a ruler beside the scrap is useful; also include your electrical supply and available floor space.
Can one plastic crusher handle every type of scrap?
Usually not equally well. Rigid sprues, bottles, sheet offcuts and flexible film behave differently inside a cutting chamber, so rotor design, knife geometry, hopper shape and screen choice must match the main feed material. Mixed feed should be assessed with representative samples before selection.
Do I need a crusher or an industrial shredder?
A crusher or granulator is commonly considered for smaller rigid parts when relatively fine, controlled regrind is required. A slow-speed shredder is often better for bulky or tough items that need coarse size reduction, although a second granulation stage may still be needed for smaller output.
A good crusher purchase starts with the scrap, not the nameplate. Compare machines using representative material, examine the regrind, and account for blade access, feeding, collection, electrical supply and maintenance before deciding.